A model- and simulation-based approach for tolerancing and verifying the functional capability of micro/nano-structured workpieces

The evaluation of functional features of manufactured workpieces is based on GO- and NO-GO-test results, which are obtained by comparing measured geometric characteristics with nominal dimensions and tolerances specified by the designer. These geometrical specifications are based on a tolerancing system, which was originally defined for the function mating capability. Against the background of upcoming lots of other new functions (like reduction of flow resistance, light absorption, reduction of friction, diffraction of light, self-cleaning or mass transmission) are to be realized with our products – particularly by micro- and nano scaled features. If the verification process will deliver the prediction of the achievable degree of functionality, the usability of a part can be assessed more accurately and in consequence quality and economics can be improved. So, a new principle for tolerancing and verifying turns out to be necessary. In this paper the fundamental deficit of the actual tolerancing and specification systems GPS and ASME Y14.5 is derived and the path for enlarging the system by preposing a functional model is shown. To verify the functional capability of the workpieces an approach based on simulations done with the parameterized mathematical–physical model of the function is suggested. Advantages of this approach will be discussed and demonstrated by examples with microstructured inking rolls, crankshafts and injection valves.     

Small oscillation fault detection for a class of nonlinear systems with output measurements using deterministic learning

Early detection of small faults is an important issue in the literature of fault diagnosis. In this paper, for a class of nonlinear systems with output measurements, an approach for rapid detection of small oscillation faults is presented. Firstly, locally accurate approximations of unknown system dynamics and fault functions are achieved by combining a high gain observer and a deterministic learning (DL) theory. The obtained knowledge of system dynamics for both normal and fault modes is stored in constant RBF networks. Secondly, a bank of dynamical estimators are constructed for all the normal mode and oscillation faults. The knowledge obtained through DL is reused with a nonhigh-gain design. The occurrence of a fault can be detected if one of residual norms of a fault estimator becomes smaller than that of the normal estimator in a finite time. A rigorous analysis of the detectability properties of the proposed fault detection scheme is also given, which includes the fault detectability condition and the fault detection time. The attractions of the paper lie in that with output measurements, the knowledge of modeling uncertainty and nonlinear faults is obtained and then is utilized to enhance the sensitivity to small faults.     

基于分形插值的改进趋势面拟合法在地面沉降中的应用

针对区域地面沉降监测点数量有限、分布不均的情况,一般采用空间插值的手段建立表面拟合模型来解决。基于分形插值,采用随机选择迭代函数的思想对传统的趋势面拟合法作出改进,改进后拟合优度系数提高0.03,达到0.995,且改进前后的拟合结果符合显著性检验的要求。实验结果表明:改进前后趋势面拟合法拟合结果满足地面沉降监测的精度要求,改进后方法的拟合优度更高,对现实地面沉降量变化的描绘更加真实,可为沉降灾害评价工作提供更准确的依据。     

In-situ modification of PEDOT:PSS work function using alkyl alcohols as secondary processing solvents and their impact on merocyanine based bulk heterojunction solar cells

The influence of a series of alkyl alcohols on the work function of PEDOT:PSS thin films is systematically investigated by Kelvin probe measurements. We show that the PEDOT:PSS work function can be increased stepwise from 5.2 eV for pristine PEDOT:PSS to 5.61 eV using either alcohols with different alkyl chain length or varying the amount of alcohol in mixtures with chlorobenzene. Moreover, we demonstrate the effect of work function modification on merocyanine based bulk heterojunction solar cells, resulting in improved values for the open-circuit voltage comparable to those obtained with high work function MoO₃. Thus, the processing method presented herein can potentially serve as a simple, alternative route to adjustable and high work function electrodes while maintaining processability from solution.     

影像设备OM测试法解读(能源之星2.0版)

美国能源之星对影像设备能效测试2.0版操作模式功率法(OM法)主要反应被测样品在完成准备状态、睡眠状态、低耗能状态或关闭状态的能耗情况。分析了OM法的各测试项目以及相应指标,归纳总结了该标准规范在实施中应注意的问题,对影像设备附加功能进行了详细说明。     

Correlation between motion of source bender element and feedback signal induced by self-monitoring

Since the introduction of bender element tests to soil testing, the reliability of the estimated travel time has been the most serious problem. The author has previously shown a potential solution whereby removing the response of the bender element subsystem from the whole response could dramatically improve the accuracy of the travel time estimation. In order to lay the foundation for estimating the response of the bender element subsystem, this paper examines the correlation between the displacements of the element and the induced feedback signals by employing a self-monitoring element. The response of the self-monitoring element is modeled as a transfer function involving two internal transfer functions that relate the input signals to the displacements and the displacements to the feedback signals, respectively. Using a laser displacement sensor, the displacements are directly measured through the entire surface and reveal the three-dimensional bending motion of the element oscillating in both longitudinal and width directions. The feedback signals are similar to, but inconsistent with, the tip displacements, and an attempt is made to correct the feedback signals. Finally, a conclusion is given on the potential for estimating the response of the bender element subsystem using the self-monitoring element.     

Study on metamerism degree evaluation based on wavelength sensitive cone weighting algorithm

Metamerism phenomenon can be used in illuminant detection to ensure the accuracy of light source. A method based on Long‐, Middle‐, Short‐ wavelength cones(LMS) weighting algorithm to evaluate metamerism degree is proposed. The chromatic relationship between the degree of metamerism mismatch and the light source is studied. Herein, the consistency between the metameric indices (MIs) and CIE1976 L*a*b* color difference ranking is analyzed by SRCC, KRCC, PLCC and RMSE. A statistically sampling method to obtain practical LMS cone fundamentals to evaluate metamerism degree is employed. The analysis results obtained show that the method based on LMS weighting algorithm has good evaluation ability and stability in simulation experiments and statistically sampling experiments, which are in line with visual characteristics of human. Proposed method meets the requirements of selecting metameric pairs used in light source detection. The analysis results have certain guiding significance.     

Analytical estimation of energy dissipations: Viscous,Joulian, and Darcy of viscoelastic fluid flow phenomena over a deformable surface

In this paper, analytical estimation of energy dissipations, such as viscous, Joulian, and Darcy dissipation of viscoelastic flow phenomena over a deformable surface has been presented. This supplement to the study of many transport processes, which occur in nature, and various experimental setups that are driven or modified by the composition of the various flow characteristics and material or phase constitution. These processes are very important and have received considerable attention in the literature. The estimation of dissipative energy in the process of transport energy is an important phenomenon to investigate. The present analysis is carried out on steady MHD viscoelastic liquid due to deformable domains. Moreover, the impact of internal heat sources and prescribed thermal conditions, such as surface temperature and heat flux, are carefully studied. Analytical solutions to governing equations are obtained with the help of Kummer's function. The solutions are presented graphically as well as in tables to estimate the energy losses and their effects on transport processes, which serve as the salient features of the current analysis. The outcomes serve as a guideline due to the process of transport properties as per the design requirements. Looking into the current scenario, dissipative heat energies have several applications in industries and technological processes, such as electric heaters, fuses, food processing, and several others.     

Comparison of discriminability of common food acceptance scales for the elderly

This study was aimed to compare four commonly used methods for evaluating consumer acceptance (the 5-point and the 9-point hedonic scales) and preference (the ranking scale and the best-worst scaling) in terms of their ability in discriminating samples and perceived ease of use by the elderly. Elderly (n = 100) and young adult (n = 100) consumers participated in this study. Each consumer evaluated five commercial orange juice samples in duplicate for hedonic rating and preference rank separately and then evaluated ten sets of three samples for the best-worst scale, following the balanced incomplete block design. Nonparametric tests were employed as normality of data was violated. A significant sample effect was observed in all four methods (P < .001). Discriminating power of the best-worst scaling was more pronounced in the elderly than in the young adults; however, the best-worst scaling was easy to use for the young adults than for the elderly.     

Multi-label,multi-task CNN approach for context-based emotion recognition

This paper proposes a new deep learning architecture for context-based multi-label multi-task emotion recognition. The architecture is built from three main modules: (1) a body features extraction module, which is a pre-trained Xception network, (2) a scene features extraction module, based on a modified VGG16 network, and (3) a fusion-decision module. Moreover, three categorical and three continuous loss functions are compared in order to point out the importance of the synergy between loss functions when it comes to multi-task learning. Then, we propose a new loss function, the multi-label focal loss (MFL), based on the focal loss to deal with imbalanced data. Experimental results on EMOTIC dataset show that MFL with the Huber loss gave better results than any other combination and outperformed the current state of art on the less frequent labels.